€15.00 ohne MwSt.
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: BMG-200
Produktinformationen Betzmann Galvanik - Schwarz Nickelelektrolyt
Unser Schwarznickel Elektrolyt zum galvanischen Schwärzen von Metallen
Dieses neue Schwarz Nickelelektrolyt zaubert eine dunkle bis schwarze Fläche direkt auf Edelstahl, Messing oder Kupfer!
Fläche polieren wenn nötig entfetten und aktivieren
Schwarz vernickeln ab 3 Volt optimal mit Platinelektrode!
Wie alle Nickelektrolyte, ist auch dieses für die Beschichtung von Metallen, die auf der Haut getragen werden, nicht geeignet!
Eine spezielle Oberflächenversiegelung ist nicht notwendig. Temperaturbeständigkeit bis ca. 200 Grad!
Smoky Nickel Brush Plating Solution plates a deep, charcoal grey layer of nickel.
Kennzeichnung des Gemisches:
Smoky Nickel - Schwarz Nickel
Signalwort: Achtung
H-Sätze:
H317: Kann allergische Hautreaktionen verursachen.
P-Sätze:
P102: Darf nicht in die Hände von Kindern gelangen.
P260: Aerosol nicht einatmen.
P280: Schutzhandschuhe / Augenschutz tragen.
P302 + P352: BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser waschen.
P501: Inhalt/Behälter Sondermüll zuführen.
Operating Conditions and Deposit Data
Voltage Range | 2.5 – 4.0 volts |
Temperature | 18 – 40 °C |
Nickel Concentration | 74 g/l |
Electrode | Platinum (see notes) |
Blackness L* (CIE Lab measure) | 40 – 45 |
Plating Rate at (3.5 volts, Platinum electrode) | Approx. 0.5 micron per minute (spot) |
Hardness | 450 – 480 MPa (Vickers) |
Density of deposit | 8.5 g/cm3 |
Stress | High stress |
Special storage requirements | None |
Shelf life | Over 5 years |
Health and Safety classification | Harmful |
Special considerations | None |
Transport (UN number) | None: Not classified as dangerous for transport |
Notes:
- We strongly advise against the use of stainless steel anodes for most of our plating processes
- Plating rates are calculated over a sample area which is permanently covered by swab.