Copper Brightener - PP Stabiliser

Product information Bright copper stabilizer for acid copper and the PP copper electrolyte from Betzmann Galvanik

Bright copper electroplating itself - optimal directly on silver conductive lacquer or copper conductive lacquer

With the bright copper additive from Betzmann Galvanik in combination with acid copper or PP copper, you obtain a highly bright copper coating on metallic or conductive surfaces.

Product description:

The "Copper" brightener additive (50 ml) - for acid and PP copper from Betzmann Galvanik.

The product properties at a glance:

Brightener for copper electrolyte "brightness (acidic)

easy self electroplating to high gloss

ideally suited for pen and bath electroplating

Brightener for copper electrolyte "bright (acidic)" - Bright bright copper electroplating

The brightener refreshes used copper electrolyte.

Simply add 4 mL of brightener to 1 liter of used copper electrolyte "Glanz" ("acidic"), and you can produce shiny copper coatings again.

The clear advantages of electroplated copper plating

Copper plating effectively protects workpieces made of iron and steel against rust and gives them a visually appealing surface thanks to the typical red luster of the precious metal. Because of its good solderability, electroplated copper plating is ideal for the production of printed circuit boards and circuit boards. Simply use the copper electrolyte together with a graphite or copper anode and you can quickly provide a component with a shiny copper coating yourself. The acidic bright copper electrolyte is mainly used to create a thick copper coating as a basis for further surface finishing. The bright effect is created immediately, we recommend the use of bright copper additive.

For example, the following combination of copper plating and subsequent electroplating steps is well suited:

Acid or PP copper electrolyte 

Nickel electrolyte - Alternatively cobalt or palladium

Gold or silver plating

Pen or Brush Plating 3 - 6 Volts.

Application and use

Larger containers and quantities are available upon request.

Simply add 4 mL of brightener to 1 liter of used copper electrolyte "Glanz" ("acidic"), and you can produce shiny copper coatings again.