High Speed Goldsolution 12 Gramm / Liter

PRODUCT PRESENTATION - HIGH SPEED GOLD ELEKTRTOLYT 999 FINE GOLD - 23,8 CARAT 

WITH 12 GRAMS OF GOLD PER LITER

More gold in the electrolyte means even faster plating, thicker layers with the same working time or more surface area.

Also the purchase of the high speed gold is cheaper, because you buy more gold per liter at a lower price.

Do-it-yourself gold plating has never been easier. Our gold electrolyte from Betzmann Galvanik can be purchased by anyone. So whether it is for use in the highly professional use of laboratories, industry, luxury companies, to the use in the hobby, main or in the side business, companies, schools, universities, TH , IHK or other authorities.

With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly:

Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,  

The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition. 

The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe. 

Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes.

The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating! 

The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more.

Partial coatings are possible by masking and masking surrounding areas.

To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..  

Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold!

Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more.

Graphite electrodes can also be used. 

Gold content: 12 grams per liter 

The procedure for gold plating:

It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be

Thorough degreasing with the electrocleaner

Activate the surface with the activator

Gilding with platinum electrode starting around 5 volts 

Operating Conditions and Deposit Data

 Hazard statements according to Art. 25 (6) CLP Regulation:

Signalwordt: Warning 

H-phrases:

H332 Harmful by inhalation.

H312 Harmful in contact with skin.

H302 Harmful if swallowed.

EUH032 Contact with acids liberates very toxic gas.

P phrases:

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.