€11.00 ohne MwSt.
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: SW10035
Kobalt Solution by Betzmann Galvanik
Our cobalt brush plating solution plates up to four times the speed of nickel brush plating solution.
It is very hard (see tech specs) and plates a shade lighter than nickel and darker than chromium.
Kobalt Brush Plating Solution plates a very hard wearing layer that’s a lot harder than nickel and plates at three or four times the speed.
It can be used as a barrier layer, as it slows down the migration of copper into plated gold layers. An alternative barrier layer could be our white bronze or our Palladium Brush, Tank Solution, Nickel Brush or our Nickel Tank Solution.
Cobalt has a slight bluish lustre (although not as pronounced as chromium). Although it is a lot less hypoallergenic than nickel, we do not recommend it for jewellery purposes.
Recommended electrode: Carbon Electrode 4 Volt - Platinum Electrode up to max. 11 Volt.
|Voltage Range||3.5 – 4.5 volts|
|Temperature||18 – 40 °C|
|Electrode||Carbon, Nickel or Platinum (see notes)|
|Cobalt content in plate||99.9% (balance carbon)|
|Plating Rate at (3.5 volts, Carbon Electrode)||Approx. 4 micron per minute (spot)|
|Hardness||Above 1,000 MPa (Vickers)|
|Density of deposit||8.9 g/cm3|
|Stress||Medium – high stress|
|Special storage requirements||None|
|Shelf life||Over 1 year|
|Health and Safety classification||Harmful|
|Transport (UN number)||None: Not classified as dangerous for transport|
Labelling acc. to CLP-VO:
Symbol word: Caution!
H319 Causes severe eye irritation.
P101 If medical advice is needed, have container or label at hand.
P102 Keep out of the reach of children.
P305 IF IN EYES:P351 Rinse cautiously with water for several minutes.
P338 Remove contact lenses if possible. Continue to rinse.
P337 + P313 If eye irritation persists: Get medical advice/attention.