Nickelstripper

Nickel stripper strips nickel plating from steel, copper, brass and silver easily and delivers the following pluses;

• Ready-to-use solution: no need for mixing
• Low hazzard
• Stripping rates of up to 50 microns per hour at 62 °C
• High capacity (1 litre can strip 40 grams of nickel)
• Low odour: minimum ventilation needed
• Supplied as a one-component, ready-to-use solution
• Non-electrolytic stripper: no need for a separate rectifier
• Long bath life
• Can be shipped worldwide

Operating Conditions

Notes:

• Tanks should be made of stainless steel, polypropylene or glass. If using glass,
  return the solution (cooled) to the container after use.
• Heating should be provided by a Teflon-coated stirring bar (if stripping in a beaker).
• For larger installations, stainless steel or titanium-sheaved heaters should be used.
• Stripping rates can be almost doubled by using light mechanical agitation:
• Stripping rate at 50°C = 10  microns per hour (no agitation)
• Stripping rate at 50°C = 17  microns per hour (with agitation)
• Stripping rate at 62°C = 50 microns per hour (with agitation)
• Black smut remaining can be removed by ultrasonic cleaning or scouring with pad.