Silver Conductive Ink

Silver conductive lacquer (12 grams or 50 grams contains 50% pure silver powder)

ready conductive lacquer for application - also suitable for airbrush 

For the coating of non-conductive materials such as wood, glass, plastic, this conductive silver lacquer can be used by Betzmann electroplating can be a helpful support. 

It should be noted that you must prepare the substrate perfectly so that the paint adheres there optimally. After drying, it will provide a conductive surface and can be coated. Children's shoes, flowers, etc. can thus be coated. 

You can apply it with a brush or also with an airbrush gun.

The smoother and shinier the paint layer, the higher the degree of gloss of the coating - please use very long and thick acid or copperplate with PP-copper. This brings the gloss!  

Conductive silver lacquer, conductive silver - contains 50 % pure silver powder in acrylic lacquer (water-based)

The Betzmann Condurctive Silver Ink has many different uses: 

"Liquid wire" for model making and electronic work. 

Especially suitable for difficult areas.

As an artist's paint, for grey metal paints

For cars, repair works, preparation for galvanizing, handicraft and painting, model making such as aircraft, ships, railroads. 

Adheres to almost all surfaces.

If in doubt, make a small test before application.

Water-based, solvent-free.

The paint dries solid, is highly elastic and water-insoluble with grayish yellow color.

And can be painted over with most other paints.

High mechanical strength.

Quantity depending on the substrate, usually 2-3 strokes with a thin brush.

Average grain size under approx. 15µm

Keep away from children. Dilutable and brush cleaning with water.

Shake well before use, stir up better, also stir up again in between while working

the heavy silver particles sink down quickly.