Platin - Platinelektrolyt online bestellen | Betzmann Galvanik

95,12 € inkl. MwSt.
82,00 € ohne MwSt.

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Platin - Platinieren mit Betzmann Galvanik Platin zeichnet sich durch hohe... mehr

Produktinformationen "Platin - Platinelektrolyt"

Platin - Platinieren mit Betzmann Galvanik

Platin zeichnet sich durch hohe Abriebfestigkeit aus und verleiht eine edle graue Oberfläche.

Alternativ: weisses Palladium

Mit Platinelektrode oder Graphitelektrode auf Gold - Goldflash - Nickel auftragen.

Platinum:

A Platinum Plating Solution with 10 grams of platinum per litre that’s been designed specifically for brush plating.

It plates a hard wearing, bright white layer. Ideal for both decorative and functional purposes.

Features	Applications
High concentration of platinum – 10 grams per litre	Suitable for brush plating both decorative and functional items such as jewellery and electrical connectors

Operating Conditions and Deposit Data

Voltage Range	4.0 – 5.0 volts
Temperature	20 – 25 °C (25 °C preferred)
Platinum concentration	10 g/l
Electrode	Carbon
Platinum content in plate	Above 99.9%
Plating Rate at (3.5 volts, Platinum electrode)	Approx. 0.25 micron per minute (spot) – see notes)
Hardness	405 Hv
Density of deposit	21.4 g/cm3
Electrical resistivity of deposit	9.8 micro ohms/cm
Stress	Not determined
Special storage requirements	None
Shelf life	Over 2 years
Health and Safety classification	Irritant
Special considerations	None
Transport (UN number)	2796

Notes:

We strongly advise against the use of stainless steel anodes for most of our plating processes.
Higer voltages give greater plating rates, however more gas is liberated and a mist mask is recommended.
Plating rates are calculated over a sample area which is permanently covered by swab.
Will plate directly onto freshly prepared nickel or stainless steel.

Weiterführende Links zu "Platin - Platinelektrolyt"