13,50 € ohne MwSt.
inkl. MwSt. zzgl. Versandkosten
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
- Artikel-Nr.: BMG-118.3
Rosegold Mixer - Betzmann Galvanik:
IN VERBINDUNG MIT Goldelektrolyt 8 oder 12 Gramm, optimal mit KLAREM GOLD BMG-072
Verwenden Sie unseren Rosegold Mixer zusammen mit dem Klaren Gold und Sie erhalten
sagenhafte warme Goldtöne. Bei einem Verhältnis 1:10 bekommen Sie dunkles Rosegold, eine
Mischung von 2:10 ähnelt dem Hochglanz polierten Kupfer. Bei Beschichtung auf Edelstahl, Nickel
oder deren Legierungen empfehlen wir zunächst die Beschichtung einer dünnen Schicht normales
Gold um dem Rosegold eine solide Basis zu geben. Mischverhältnisse entnehmen Sie dem Leitfaden.
Features | Used for |
Rose gold plate is very hard compared to pure gold. | Great for plating items subject to a high-wear environment (jewellery). |
Plates fast. | Reduces plating time. |
When mixed with K-Gold, creates the classic warm tones of rose gold. | Selective plating of a range of personal items for example jewellery and watch cases and straps. Can be used on larger items such as silverware and picture frames. |
Redder deposits can be obtained by increasing the volume of mixer. | Greater flexibility in colour matching. |
Consistency of alloy throughout process sequence. | Very useful especially when plating large work or plating to higher thickness: the shade of gold plated doesn’t change. |
Instructions for use
Carbon Electrode
3 – 3.5 volts
20 – 25 centigrade
Ratio of Rosegold Mixer to K-Gold | Shade Produced | Remarks | |
1:10 | Yellow-red shade | 18 carat alloy (75% gold, 25% copper). Plates fast (up to 1.5 microns per minute). Bright, hard gloss finish. | |
1.5:10 (see note below) | Becomes redder | 15 carat gold alloy (62.5% gold, 37.5% copper) Plates bright and fast. | |
2:10 (see note below) | Red gold | 12 carat alloy – (50% gold, 50% copper). If wanting to plate over 0.25 microns, plate until it goes dull, polish with MPU and then plate again. | |
4:10 (see note below) | Red gold | Below 10 carat alloy. Tarnishes readilly and not recommended for decorative purposes. |
Notes:
- Rose gold mixes above 1:10 are a lot more susceptible to tarnish than mixes of 1:10 and lower
- Remove any existing layers of rose gold before plating
Labeling gem. CLP-VO:
Signalwort: Achtung
H315 Verursacht Hautreizungen
H319 Verursacht schwere Augenreizung
H335 Kann die Atemwege reizen.
P261 Einatmen von Staub/Rauch/Gas/Nebel/Dampf/ Aerosol vermeiden
P280: Schutzhandschuhe/Schutzkleidung/Augenschutz/ Gesichtsschutz tragen
P305 BEI KONTAKT MIT DEN AUGEN:P351 Einige Minuten lang behutsam mit Wasser ausspülen.
P338 Eventuell Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter ausspülen