Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Handle / Anode Holder – Precision Electrode Holder for Pen and Brush PlatingErgonomic Electrode Holder for Professional Electroplating ApplicationsThe Handle / Anode Holder is the ideal tool for precise work in pen plating, brush (tampon) plating and selective electroplating. It securely holds a wide range of electrodes while providing excellent electrical conductivity and maximum control throughout the plating process.Its ergonomic design ensures comfortable handling and precise guidance of the electrode, even during extended use. Suitable for hobbyists, workshops, laboratories and industrial electroplating applications.Your AdvantagesErgonomic handle for comfortable operationSecurely holds Ø 4 mm and Ø 6 mm electrodesCompatible with graphite, stainless steel, copper, nickel, zinc and platinum electrodesExcellent electrical conductivityPrecise control for selective platingIdeal for pen plating, brush plating and selective repairsDurable and robust constructionQuick and easy electrode replacementProfessional quality from Betzmann GalvanikWhy Use a High-Quality Anode Holder?In pen plating and brush plating, not only the electrolyte but also precise electrode control is essential for achieving outstanding plating results. A professional anode holder provides a secure electrical connection and allows smooth, even movement across the workpiece.Benefits include:Uniform metal depositionImproved coating qualityPrecise touch-up and repair workReliable electrical contactComfortable operation during long plating sessionsTypical ApplicationsIdeal for:Gold platingSilver platingNickel platingCopper platingChromium platingRhodium platingPalladium platingPlatinum platingJewellery restorationWatch repairsElectronic componentsModel makingRestoration workWorkshopsLaboratoriesIndustrial applicationsCompatibilityCompatible with most standard electroplating electrodes, including:Graphite electrodesStainless steel electrodesCopper electrodesNickel electrodesZinc electrodesPlatinum electrodesSuitable for Ø 4 mm and Ø 6 mm electrodes.How to UseInsert the appropriate electrode into the holder.Secure the electrode firmly.Connect the cable to your power supply.Fit a plating pad or swab and saturate it with the electrolyte.Plate the workpiece using smooth, even movements.After use, clean the holder thoroughly and remove any electrolyte residue to ensure a long service life.Technical SpecificationsApplication: Pen plating, brush plating and selective electroplatingCompatible with Ø 4 mm and Ø 6 mm electrodesErgonomic insulated handleSecure electrical contactHeavy-duty construction for professional usePackage Contents1 × Handle / Anode HolderQuality from Betzmann GalvanikThe Handle / Anode Holder has been developed for daily professional electroplating applications. Its ergonomic design, robust construction and universal compatibility with various electrodes make it the perfect accessory for precise plating work. Professional quality from Betzmann Galvanik for consistently outstanding electroplating results.

Thick Multi-Layer Anode Pad – Maximum Durability for Demanding Electroplating The thick multi-layer anode pad is a highly durable and robust tampon (anode sleeve) designed for professional use in pen plating and brush (tampon) plating applications. Its reinforced multi-layer construction provides significantly longer service life compared to standard pads while ensuring consistent and uniform electrolyte transfer during the plating process. This makes it the ideal solution for demanding applications, rough surfaces, and intensive use conditions. Key Benefits Multi-layer construction for maximum durability Ideal for rough, uneven, or structured surfaces Significantly reduced wear compared to soft pads Uniform electrolyte distribution for consistent coatings Compatible with a wide range of plating solutions Cost-efficient due to extended lifespan Applications Pen plating (localized electroplating) Brush / tampon plating Repair and touch-up work Technical and functional coatings Processing of rough or heavily used surfaces This anode pad is the preferred choice when standard pads wear out quickly or fail to provide consistent results. Technical Specifications Design: thick, multi-layer stitched construction Structure: reinforced fabric layers for high stability Absorption: high electrolyte retention capacity Use: universal for electroplating applications Scope of delivery: 1 piece Compatibility Suitable for anode rods up to approx. 6 mm diameter Expandable up to approx. 8 mm if adjusted Dual insertion openings for extended usability Compatible with: Graphite anodes Platinum anodes Standard plating pens Process Advantages Even electrolyte and current distribution Reduced streaking and uneven coatings Better control on difficult surfaces Longer operating time → fewer replacements Increased efficiency in demanding applications Function in the Plating Process The anode pad acts as an electrolyte carrier and contact medium between the anode and the workpiece. It directly affects: Coating uniformity Surface quality Process stability A high-quality multi-layer pad ensures consistent, professional results even under heavy use. Application Note Pre-soak thoroughly with electrolyte before use to ensure conductivity Inspect regularly and replace when worn Conclusion – The Professional Choice for Heavy-Duty Applications The thick multi-layer anode pad is the ideal solution for professionals working under demanding electroplating conditions. It delivers: Maximum durability Reliable coating quality Improved process efficiency A small component with a major impact on plating performance and consistency.

Gold Electrolyte 8 g/L – 24K Hard Gold PlatingProfessional gold plating electrolyte containing 8 g of gold per liter for high-quality 24K gold deposits – suitable for tank plating, pen plating and tampon plating.This high-quality Gold Electrolyte 8 g/L is designed for producing uniform, durable and visually attractive 24-karat gold coatings. It can be used for conventional tank electroplating as well as for selective gold plating with a plating pen or tampon system.Ideal for jewelry, watches, metal components, restoration, repair work, model making, prototypes, individual pieces and professional surface finishing.Key Benefits8 g gold per liter24K gold / 99.9% goldSuitable for tank electroplatingSuitable for pen plating / brush platingSuitable for tampon plating / selective electroplatingHigh deposition performanceProduces uniform, high-quality gold depositsSuitable for professional applications and repair workAvailable in different container sizesTechnical support directly from Betzmann GalvanikTechnical DataParameterSpecificationGold content8 g/LGold purity99.9%Gold quality24KWorking voltageapprox. 3–5 VRecommended temperatureapprox. 14–25 °CDeposition rateapprox. 0.5 µm/min at 3.5 VMaximum recommended thicknessup to approx. 5 µmHardnessapprox. 220–230 HVSuitable anodePlatinum or carbonPlease note: Actual deposition rate and achievable coating thickness depend on the substrate, surface preparation, current density, temperature, electrolyte movement and plating time.Suitable for Tank, Pen and Tampon PlatingThis electrolyte offers excellent versatility for different gold-plating applications.With tank electroplating, complete components or assemblies can be coated with a uniform gold layer.For repairs, partial areas and difficult-to-reach surfaces, pen plating and tampon plating are particularly useful. These methods allow gold to be deposited selectively exactly where it is required, without immersing the entire component in a plating bath.Typical applications include:Gold plating repairsSelective gold platingJewelry and watchesElectrical contact areasMetal fittings and componentsIndividual partsRestoration workDecorative surface finishingPrototyping and small-batch productionCorrect Surface Preparation Is EssentialA high-quality gold coating always starts with proper surface preparation.The substrate must be thoroughly cleaned, degreased and properly activated before plating. Depending on the base material, an appropriate intermediate layer may also be required.Different substrates such as copper, brass, silver, stainless steel, steel, zinc alloys and aluminum require different preparation and activation procedures.For demanding applications, we recommend selecting the complete plating sequence according to the specific substrate and intended use.High-Quality 24K Gold DepositsWith an 8 g/L gold concentration, 24K gold and a hardness of approximately 220–230 HV, this electrolyte is suitable for producing attractive and relatively wear-resistant gold coatings.Depending on the application, thin decorative coatings or thicker functional gold layers can be deposited. For components exposed to mechanical wear, sufficient coating thickness is essential.Professional Gold Plating for Industry, Workshops and Individual ApplicationsWhether you are looking for a solution for complete tank plating or precise repair and selective plating with a pen or tampon, this 8 g/L Gold Electrolyte provides a versatile solution for professional gold plating applications.Betzmann Galvanik provides technical advice on electrolyte selection, surface preparation and the appropriate electroplating process for your application.Order Gold Electrolyte 8 g/LProfessional 24K Gold Electrolyte for tank plating, pen plating and tampon plating – ideal for gold plating, repair work, restoration and high-quality surface finishing.If you are unsure which preparation or intermediate layer is required for your particular substrate, please contact us for technical advice.