Anode sleeve fuzzy
Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.
Storage Cup transparent
Product Information "Screw Jar 250 ml Transparent"250 ml plastic screw jar made of transparent polypropylene (PP) with a standard white screw cap made of polyethylene (PE).The transparent plastic jar is particularly suitable for storing ointments, pastes, powders, or free-flowing substances.250 ml Plastic Jar / Transparent Screw JarSpecificationDetailsNominal volume 250 mlDiameter 80 mmHeight incl. lid 58 mmMaximum label height 36 mmJar material PolypropyleneLid material PolyethyleneAppearance TransparentClosure Standard whiteApplication Ointments, creams, powders, free-flowing substancesOther names Plastic jar, screw jar, universal jar
Large storage cup white PP
Large storage cup - Betzmann Galvanik - Real Gold This stable cup with screw cap made of transparent PP holds approx. 375 ml. Practical is the storage of the electrode with the cloth pad in the respective electrolyte. On request, you will receive the appropriate labelling for the material to be stored. Colour varies, black or white lid! Dimensions approx. 8 cm high, diameter 7.3 cm
microfiber-plating-swab-brush-plating-8mm
Microfiber Plating Swab for Brush Plating – Up to 8 mm Rod ElectrodesHigh-Quality Replacement Microfiber Swab for Brush Plating and Bath ElectroplatingThis high-quality microfiber plating swab is designed for brush plating and tampon electroplating with compatible electroplating solutions. Suitable for rod electrodes up to 8 mm in diameter, it offers excellent absorbency, a durable stitched construction and versatile application options.Whether you are gold plating, silver plating, copper plating or applying other compatible electroplated coatings, a suitable plating swab is an essential accessory for controlled and efficient brush plating.Product FeaturesHighly absorbent microfiber material for brush platingCompatible with suitable Betzmann Galvanik rod electrodes up to 8 mm in diameterDurable, fully stitched constructionChemically resistant when used with compatible electroplating solutionsSuitable for brush plating and tampon electroplatingCan also be used as an anode sleeve in bath electroplatingSuitable for Brush Plating and Tampon ElectroplatingThe absorbent microfiber material holds the electroplating solution effectively and supports smooth application during brush plating. The swab slides over a suitable rod electrode and is designed for practical everyday use in professional workshops and DIY electroplating applications.Important: The opening is relatively wide. For a secure fit, we recommend fastening the swab to the electrode with a thin rubber band. Alternatively, the opening can be held in place with a finger during brush plating.Also Suitable as an Anode Sleeve for Bath ElectroplatingThis versatile microfiber swab can also be used as a protective buffer around a rod anode during bath electroplating. It helps prevent direct contact between the anode and the workpiece. Suitability depends on the electrolyte and the specific plating process.Technical DetailsMaterial: MicrofiberDesign: Fully stitchedCompatible electrode diameter: Up to 8 mmApplication: Brush plating, tampon plating and use as an anode sleeveQuantity: 1 microfiber plating swabChoose quality electroplating accessories from Betzmann Galvanik for practical solutions in brush plating and bath electroplating.
Graphite Electrode Ø 6 mm – Universal Electrode for Tank, Pen and Brush Plating
Graphite Electrode Ø 6 mm – Universal Electrode for Professional ElectroplatingChemically Inert Graphite Electrode for Tank, Pen and Brush PlatingThe Graphite Electrode Ø 6 mm is manufactured from high-quality, high-density fine-grain graphite and is ideal for a wide range of electroplating applications. It is used wherever a metal-free, chemically inert electrical conductor is required and contamination of the electrolyte by metal ions must be avoided.Thanks to its excellent chemical resistance, graphite dissolves only very slowly in the electrolyte. This keeps the electrolyte composition stable and ensures high-quality, uniform plating results.The graphite electrode is perfectly suited for tank plating, pen plating and brush (tampon) plating and is compatible with a wide variety of electroplating solutions.Your AdvantagesManufactured from high-quality fine-grain graphiteChemically inertVery low wearNo contamination of the electrolyte with metal ionsExcellent chemical resistanceUniform current distributionSuitable for a wide range of electroplating processesLong service lifeFits standard 6 mm electrode holdersProfessional quality from Betzmann GalvanikWhy Use a Graphite Electrode?Many electroplating processes require that no additional metal ions enter the electrolyte, as these can negatively affect coating quality.Graphite offers several important advantages:Chemically almost inertVery low solubilityExcellent temperature resistanceGood electrical conductivityNo contamination of the electrolyteThese properties make graphite the preferred choice for many decorative and technical plating applications.Typical ApplicationsIdeal for:Gold platingSilver platingChromium platingPalladium platingPlatinum platingWhite bronze platingBlack nickel platingTank platingPen platingBrush (tampon) platingActivating solutionsCleaning solutionsWorkshopsLaboratoriesIndustrial applicationsRestorationModel makingMaterial PropertiesThe electrode is manufactured from high-density fine-grain graphite and offers:Excellent chemical resistanceGood electrical conductivityLow wearSlow consumption in the electrolyteLong service lifeApplication InstructionsBefore use:Keep the electrode clean and free from greaseUse a suitable electrolyteFollow the recommended voltage and current settingsDuring operation, the graphite electrode wears only slowly. Replacing it when necessary ensures consistently high-quality plating results.Technical SpecificationsMaterial: High-density fine-grain graphiteDiameter: 6 mmExcellent chemical resistanceVery good electrical conductivitySuitable for standard electrode holdersPackage Contents1 × Graphite Electrode Ø 6 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional accessories for demanding electroplating applications. The Graphite Electrode Ø 6 mm offers excellent chemical resistance, long service life and universal compatibility, making it the ideal choice for hobby users, workshops and industrial applications.
Alligator Clip / Contact Clamp for Electroplating – Professional Clamp for Tank, Pen & Brush Plating
Alligator Clip / Contact Clamp for Electroplating – Professional Electrical Connection for Tank, Pen & Brush PlatingProfessional Contact Clamp for Reliable Electrical Connections in Electroplating ApplicationsThe Alligator Clip / Contact Clamp BMG-019 is an essential accessory for professional electroplating applications. It provides a secure, reliable, and low-resistance electrical connection between the power supply and the workpiece, ensuring a stable current flow throughout the entire plating process.Its strong spring mechanism and high clamping force allow the clip to hold workpieces securely while maintaining excellent electrical conductivity. This results in consistent coating quality and reliable electroplating performance.The contact clamp is ideal for tank plating, pen plating, and brush plating, making it a versatile accessory for jewelry manufacturing, watchmaking, industrial electroplating, restoration work, and laboratory applications.ApplicationsThe contact clamp is ideal for:Tank PlatingPen PlatingBrush PlatingGold PlatingSilver PlatingNickel PlatingCopper PlatingChromium PlatingRhodium PlatingPalladium PlatingPlatinum PlatingRuthenium PlatingCobalt PlatingDecorative electroplatingSelective platingRepair platingSurface restorationSuitable for:JewelersGoldsmithsJewelry manufacturersElectroplating companiesWatchmakersLaboratoriesIndustrial applicationsProfessional workshopsHobby usersProduct BenefitsReliable electrical contactHigh clamping forceExcellent electrical conductivityLow contact resistanceDurable metal constructionCorrosion-resistant designEasy to install and removeSecure workpiece connectionLong service lifeSuitable for professional electroplating applicationsWhy a High-Quality Contact Clamp MattersA stable electrical connection is essential for achieving high-quality electroplated coatings.Reliable current transfer helps ensure:Uniform coating thicknessExcellent adhesionHigh-quality surface finishesConsistent plating resultsReduced electrical lossesSmooth, uninterrupted electroplatingUsing a professional contact clamp significantly improves the efficiency and quality of the entire electroplating process.Typical ApplicationsThe contact clamp is suitable for securely connecting:JewelryRingsNecklacesPendantsBraceletsEarringsWatch casesEyewear framesMetal sheetsIndustrial componentsPrecision partsEngineering componentsPrototype partsRestoration projectsCompatibilityThe alligator clip is compatible with virtually all common electroplating systems and laboratory power supplies.Ideal for use with:Electroplating power suppliesConnection cablesElectrode holdersGraphite electrodesPlatinum electrodesAnode rodsTank plating systemsPen plating systemsBrush plating systemsQuality from Betzmann GalvanikBetzmann Galvanik supplies premium electroplating accessories for professional users worldwide. Our contact clamps are manufactured from high-quality materials to provide excellent conductivity, outstanding durability, and reliable performance. They ensure a secure electrical connection and help achieve uniform, repeatable electroplating results in both industrial and workshop environments.