Stainless Steel & Nickel Activator – Professional Surface Activation & Pickling Solution Perfect Adhesion Starts with Proper Surface Activation This high-performance activator for stainless steel and nickel is a specialized pickling and activation solution designed to prepare metal surfaces for electroplating and coating processes. It effectively removes oxide layers and passive films that prevent adhesion, ensuring optimal bonding for gold plating, nickel plating, silver plating, chromium plating, and more. Why Surface Activation is Essential Even visually clean metal surfaces contain microscopic oxide layers that: reduce electrical conductivity prevent proper coating adhesion cause defects such as peeling, staining, or uneven deposits This activator eliminates these barriers and creates a chemically active, plating-ready surface. Key Benefits at a Glance ✔ Ensures excellent coating adhesion ✔ Removes oxides and passivation layers effectively ✔ Suitable for stainless steel, nickel, copper, brass & more ✔ Fast application time – typically 30–60 seconds ✔ Can be used with or without electrical assistance ✔ Essential for professional electroplating results Typical Applications  Electroplating and surface finishing  Jewelry manufacturing and gold plating  Industrial and precision engineering  Restoration of metal components Technical Specifications Product type: Activator / pickling solution Application: Pre-treatment before plating Treatment time: approx. 30–60 seconds Voltage (optional): from approx. 2.7 V Process types: immersion (electroless) brush plating / swab method (with current) Suitable Materials Stainless steel Nickel and passive nickel surfaces Copper Brass Steel and various alloys How to Use (Step-by-Step Guide) 1. Surface Preparation Polish if required Thoroughly degrease the workpiece 2. Activation (Immersion Method) Immerse the part for 30–60 seconds Rinse thoroughly with water 3. Optional: Electrolytic Activation Use a stainless steel or graphite electrode Apply approx. 2.7 V Treat surface for ~30 seconds 4. Proceed to Plating Plate the part within 10–30 minutes (to avoid re-oxidation) Pro Tips for Best Results ✔ Plate immediately after activation ✔ Agitation improves uniformity ✔ Combine with proper degreasing for optimal results ✔ Test on sensitive or unknown materials Common Issues & Solutions Poor adhesion → insufficient activation or delay before plating Stains or uneven finish → inadequate cleaning Dull surface → over-treatment or incorrect parameters Reduced performance → contaminated solution Safety Information Signal word: Warning / Danger May cause skin and eye irritation or burns Wear protective gloves and eye protection Avoid direct contact Environmental Information Dispose of according to local regulations Do not release into wastewater Why Choose This Activator? Unlike simple cleaners, this product provides: True chemical activation (not just cleaning) Significantly improved coating adhesion Reliable and reproducible professional results An essential step for anyone aiming for high-quality electroplating finishes.

Galvano Degreaser (Electrocleaner) – Professional Metal Cleaning for Perfect Plating Results The Essential First Step for High-Quality Coatings The Galvano Degreaser (Electrocleaner) is a powerful cleaning solution designed for the thorough removal of oils, grease, and contaminants from metal surfaces. It provides the critical foundation for electroplating processes such as gold plating, nickel plating, silver plating, or chrome plating – because only perfectly clean surfaces ensure strong adhesion and flawless finishes. Why Degreasing is Crucial Even microscopic residues can lead to: poor coating adhesion stains, spotting, or cloudiness uneven plating layers peeling or defects This electrocleaner ensures a chemically clean, wettable surface, perfectly prepared for further processing. Key Benefits at a Glance ✔ Removes grease, oil, and contaminants effectively ✔ Improves adhesion of electroplated coatings ✔ Suitable for a wide range of metals ✔ Fast and easy to use ✔ Can be used with or without electrical current ✔ Essential for professional plating results Typical Applications  Electroplating and surface finishing  Jewelry manufacturing and gold plating  Industrial and precision engineering  Restoration of metal components Technical Specifications Product type: Galvano degreaser / electrocleaner Application: Pre-cleaning before electroplating Process types: immersion cleaning (electroless) electrolytic cleaning (with current) Function: removes organic contaminants improves surface wettability Suitable Materials Steel Stainless steel Copper Brass Nickel Various metal alloys How to Use (Step-by-Step Guide) 1. Preparation Remove heavy dirt mechanically if necessary Prepare cleaning bath 2. Cleaning (Immersion Method) Immerse the workpiece in the solution Allow to act for a few minutes Apply slight movement if possible 3. Electrolytic Cleaning (Optional) Connect the workpiece as cathode or anode Apply current for a short time Significantly enhances cleaning efficiency 4. Rinsing Rinse thoroughly with water Ideally use deionized water 5. Next Step Proceed immediately with: activation plating Pro Tips for Best Results ✔ Combine with an activator for maximum adhesion ✔ Fresh solution ensures optimal performance ✔ Agitation improves cleaning efficiency ✔ Use multi-stage cleaning for heavily contaminated parts Common Issues & Solutions Poor adhesion → insufficient degreasing Stains or residues → incomplete cleaning Uneven coating → inconsistent cleaning process Reduced performance → contaminated or exhausted bath Safety Information Wear protective gloves and eye protection Avoid skin contact Do not inhale vapors Environmental Information Dispose of according to local regulations Do not release into the environment Why Choose This Galvano Degreaser? Compared to standard cleaners, this product provides: deep and effective degreasing optimal preparation for electroplating processes reliable and reproducible professional results An essential step for anyone aiming for perfect coating quality.

Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Stainless Steel Electrode Ø 6 mm (BMG-007) Short Description The Stainless Steel Electrode Ø 6 mm is a versatile plating electrode designed for a wide range of electroplating tasks, especially degassing, activation, dechroming and chrome plating. Suitable for pen, bath and pad electroplating, it delivers consistent current flow and durable performance in your plating setups.  Product Description This electrode is made from corrosion-resistant stainless steel with a diameter of 6 mm and a length of approx. 9.5 cm, making it a compact and easy-to-handle tool for many galvanic applications. It is particularly effective for: Degreasing and activating metal surfaces prior to plating Dechroming or preparing surfaces for subsequent layers Chrome plating processes where robust anode performance is needed Pre-treatment and cleaning steps during electrochemical work  It fits standard holders and electrode grips used in pen and tampon plating and provides reliable performance in repeated or continuous use.  Key Benefits Durable stainless steel construction: Offers good chemical resistance and long service life.  Broad compatibility: Well-suited for degreasing, activation and dechroming operations.  Effective for chrome plating: Works particularly well in chromic electroplating applications. Standard size: Ø 6 mm fits most electrode handles and plating tools.  Easy to use: Ergonomic size and reliable conductivity promote smooth workflows.  Usage Tips Clean and degrease surfaces before using the electrode for best results. In plating processes such as gold or silver, consider using a graphite or platinum electrode instead, as stainless steel may contaminate some plating baths.  For chrome plating, stainless steel may be used effectively, sometimes in combination with aluminium electrodes.  Conclusion The Stainless Steel Electrode Ø 6 mm is a reliable, robust and versatile tool for a variety of electroplating and surface preparation tasks – especially degreasing, activation and chrome plating. Its solid construction and compatibility with standard plating systems make it a valuable addition to any workshop or lab.