€81.51 ohne MwSt.
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: BMG-110
A Platinum Plating Solution with 10 grams of platinum per litre that’s been designed specifically for brush plating.
It plates a hard wearing, bright white layer. Ideal for both decorative and functional purposes.
|High concentration of platinum – 10 grams per litre||Suitable for brush plating both decorative and functional items such as jewellery and electrical connectors|
Operating Conditions and Deposit Data
|Voltage Range||4.0 – 5.0 volts|
|Temperature||20 – 25 °C (25 °C preferred)|
|Platinum concentration||10 g/l|
|Platinum content in plate||Above 99.9%|
|Plating Rate at (3.5 volts, Platinum electrode)||Approx. 0.25 micron per minute (spot) – see notes)|
|Density of deposit||21.4 g/cm3|
|Electrical resistivity of deposit||9.8 micro ohms/cm|
|Special storage requirements||None|
|Shelf life||Over 2 years|
|Health and Safety classification||Irritant|
|Transport (UN number)||2796|
- We strongly advise against the use of stainless steel anodes for most of our plating processes.
- Higer voltages give greater plating rates, however more gas is liberated and a mist mask is recommended.
- Plating rates are calculated over a sample area which is permanently covered by swab.
- Will plate directly onto freshly prepared nickel or stainless steel.