PP Copper

Product information PP Copper Electrolyte from Betzmann Galvanik

Bright shiny copper electroplating - optimal directly on silver conductive lacquer or copper conductive lacquer

With our Betzmann Galvanik "PP Copper Bright" you get a strong bright copper coating on metallic or conductive surfaces.

PP Copper Electrolyte - The clear advantages of electroplated copper plating

A copper coating effectively protects workpieces made of iron and steel against rust and gives a visually appealing surface due to the typical red luster of the precious metal. Because of its good solderability, electroplated copper plating is ideal for the production of printed circuit boards and circuit boards. Simply use the copper electrolyte together with a graphite or copper anode and you can quickly provide a component with a shiny copper coating yourself.

This copper plating solution is great for plating non-conductive materials. It brightly plates and smooths the surface. PP Copper also plates very well on brass and tin.

When plating very large areas or building glossy surfaces on matte surfaces, we recommend mixing with PP stabilizer powder to prevent tarnishing.

Properties and Applications:

Finishes glossy 

Reduces the amount of polishing required for high gloss - saves time and money when finishing precious metals such as silver and gold

Leveling Solution If the item to be plated is heavily scratched, you can coat PP Copper extra thick and then polish so you don't have to over polish the item first.

Can be used to coat non-conductive surfaces such as wood. PP Copper is recommended for the first coat on conductive copper or silver conductive paint.

Can be used for coating metals such as brass and tin. Applies very well to brass and tin. It also serves as a good primer for nickel and gold when plating tin. 

Please note that PP stabilizer powder is not required when plating PP Copper with pin and pad plating on metals such as brass and tin.

Pen Electroplating: 3 - 6 volt with graphite or copper electrode process.

Operating Conditions and Deposit Data

Notes:

• We strongly advise against the use of stainless steel anodes for most of our plating processes especially in the case of PP Copper Brush Plating Solution
• Plating rates are calculated over a sample area which is permanently covered by swab.
• When plating onto brass or pewter, PP Stabiliser will not be required.