Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

Nickel Remover (Nickel Stripper) – Fast, Selective Nickel Removal Without Electrolysis Remove Nickel Coatings Efficiently – Safe, Precise & Professional This high-performance nickel remover is a ready-to-use chemical solution designed for the selective removal of nickel plating from metals such as steel, copper, brass, and silver. No electrolysis required – making it ideal for electroplating, restoration, jewelry work, and industrial applications. Key Benefits at a Glance ✔ No electrolysis needed – works chemically without power supply ✔ Ready to use – no mixing or preparation ✔ Fast stripping rate – up to 50 µm/hour ✔ Selective removal – protects base materials ✔ High capacity – up to 40 g nickel per liter ✔ Low odor – more comfortable to use ✔ No toxic dust – safer than grinding or sanding ✔ Reusable solution – long bath life Typical Applications  Electroplating (rework & defect correction)  Jewelry & watchmaking (preparation for re-plating)  Restoration of metal objects  Industrial surface treatment & precision engineering Perfect for removing: Electroplated nickel coatings Electroless nickel (Ni-P) layers Technical Specifications Process type: chemical, non-electrolytic Operating temperature: 50–65 °C (optimal) Max. stripping rate: up to 50 µm/h Capacity: approx. 40 g Ni per liter Suitable base materials: Steel / iron Copper Brass Silver How to Use (Step-by-Step Guide) 1. Surface Preparation Thoroughly degrease the part Remove oils, grease, polishing residues, and oxides 2. Prepare the Bath Pour solution into a suitable container Heat to 50–65 °C Recommended materials: Borosilicate glass Ceramic / enamel Polypropylene 3. Stripping Process Fully immerse the workpiece Apply gentle agitation or movement Monitor the stripping process 4. After Treatment Remove part immediately once nickel is gone Rinse thoroughly with water (preferably deionized) 5. Cleaning & Finishing Remove residues using: ultrasonic cleaning soft mechanical wiping Pro Tips for Best Results ✔ Agitation significantly increases stripping speed ✔ Higher temperature = faster process (but shorter bath life) ✔ Process thick coatings in multiple cycles ✔ Test on a sample part when working with unknown alloys Common Issues & Solutions Slow stripping → Temperature too low or bath exhausted Uneven removal → Poor cleaning or no agitation Base metal attack → Exposure time too long Dark residues → Remove with ultrasonic or wiping Foaming or instability → Contamination in bath Safety Information Signal word: Warning May cause allergic skin reactions Wear protective gloves and eye protection Avoid skin contact and inhalation Environmental Information Contains dissolved nickel (heavy metal) Dispose of as hazardous waste according to local regulations Why Choose This Nickel Remover? Compared to mechanical or aggressive chemical methods, this product offers: Controlled, reproducible results Protection of base materials Improved safety and handling Professional-grade performance

Large storage cup - Betzmann Galvanik - Real Gold    This stable cup with screw cap made of transparent PP holds approx. 375 ml.   Practical is the storage of the electrode with the cloth pad in the respective electrolyte. On request, you will receive the appropriate labelling for the material to be stored.  Colour varies, black or white lid!    Dimensions approx. 8 cm high, diameter 7.3 cm 

Aluminium Electrode Ø 6 mm (SW10012) Short Description The Aluminium Electrode Ø 6 mm is a robust, chemically resistant anode designed for electroplating applications where aluminium offers advantages. It is ideal for chrome, nickel and other plating processes that require reliable current distribution, minimal contamination and consistent performance. Product Description Made from high-quality aluminium, this electrode delivers excellent electrical conductivity and broad chemical resistance in many electrolytes. It provides a stable current supply that enhances process consistency and helps produce uniform, reproducible deposits. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating setups. Typical Applications Electroplating processes such as chrome and nickel plating Bath, pen and pad plating Surface cleaning, activation and pre-treatment Workshop, laboratory and manufacturing environments Key Benefits Strong electrical conductivity for stable electroplating Chemical resistance in a variety of electrolytes Low contamination of the plating bath Longer service life compared to less stable electrodes Versatile compatibility with standard Ø 6 mm holders Usage Instructions Preparation: Clean and degrease workpieces thoroughly before plating. Setup: Connect the electrode as the anode; the workpiece serves as the cathode. Plating: Operate the electrolyte according to process requirements. Maintenance: Clean the electrode regularly to ensure long-lasting performance. Conclusion The Aluminium Electrode Ø 6 mm offers a reliable and versatile anode solution for a range of electroplating applications. Its combination of good conductivity, chemical resistance, and ease of use makes it suitable for hobbyists, workshop professionals and industrial plating tasks alike.