Copper conductive lacquer spray 400 ml

Copper Conductive Spray 400 ml SW10068

Electrically conductive copper spray for repairs, conductivity enhancement, and contact surfaces

Short Description

The Copper Conductive Spray 400 ml SW10068 is a ready‑to‑use, electrically conductive copper coating in spray form.
Once applied and dried, it forms an electrically conductive copper layer that is ideal for repairing conductive pathways, improving electrical contacts, or creating conductive surfaces on non‑metal parts.
The spray combines easy application, effective conductivity, and good adhesion on a wide variety of substrates.

Applications

This conductive spray is used for:

• Repair or extension of conductive tracks on PCBs, contacts, or wiring

• Creating conductive surfaces on non‑metallic pieces

• Improving contact quality on connectors or switches

• Conductive coating of plastic, ceramic, or composite materials

• Prototyping and fine wiring tasks in electronics and electrical engineering

The spray format enables quick, uniform application, especially in hard‑to‑reach areas.

How It Works (Simple Explanation)

The copper conductive spray contains finely dispersed copper particles. After spraying and drying, these particles connect to form an electrically conductive surface:

1. Prepare: Clean and degrease the surface.

2. Spray: Apply the product in a thin, even layer from the recommended distance.

3. Dry: The sprayed film dries to form a conductive copper layer.

4. Ready to Use: The surface is now electrically conductive and can be used or further processed.

Benefits of Copper Conductive Spray SW10068

• Electrically conductive layer immediately after drying

• Spray application for easy, uniform coverage

• Good adhesion on multiple substrates (metal, plastic, ceramic)

• Repair‑friendly for conductive tracks and contacts

• Time‑saving versus liquid conductive coatings

• Suitable for electronics, electrical installation, prototyping, and repairs

Technical Parameters (Guidelines)

Practical Application Tips

Preparation:

• Clean and degrease the surface thoroughly.

Spray Application:

• Shake can well.

• Spray from approx. 20–30 cm distance evenly onto the surface.

• For improved conductivity, apply several thin coats.

Drying:

• Allow to dry; slight warming speeds up curing.

Post‑treatment:

• Once fully dry, the layer can be mechanically refined or plated over.

Safety Information

Conductive sprays contain solvents and must be used safely:

• Use in well‑ventilated areas

• Wear protective gloves, eye protection, and respiratory protection

• Avoid skin and eye contact

• Rinse thoroughly with water if contact occurs

• Do not ingest; keep out of reach of children

• Do not spray near open flames

• Dispose according to local aerosol disposal regulations

Conclusion

The Copper Conductive Spray 400 ml SW10068 is a practical, fast solution for generating electrically conductive surfaces and repairing conductive paths.
Its spray format makes it ideal for electronic repairs, contact enhancements, and conductive coatings in both hobby and professional environments.