PP Copper Electrolyte BMG‑130.1 High-Gloss Copper Plating Solution for Electroplating Applications Short Description The PP Copper Electrolyte BMG‑130.1 is a high-performance electroplating solution for depositing bright, uniform copper layers. It produces thick, glossy coatings suitable for decorative surfaces, functional layers, or as a foundation for further electroplating processes such as nickel or gold. Applications The PP Copper Electrolyte is versatile and can be used for: Electrolytic copper plating of metallic surfaces Protective layers on iron and steel for corrosion resistance Intermediate layer or primer for nickel, gold, or other metals Coating conductive paint on plastics Decorative copper-red finishes Solderable layers for PCBs and electronic boards Its balanced composition makes it suitable for both hobbyist and professional applications in workshops, labs, or industrial environments. How Copper Electroplating Works (Simple Explanation) Electroplating uses direct current (DC) to reduce copper ions from the electrolyte onto the surface: Prepare the workpiece: Clean and degrease. Plating: Connect the workpiece as the cathode; use a graphite or copper anode. Deposition: Copper forms a thick, glossy layer. Post-treatment: Rinse with water and dry – the surface exhibits the characteristic bright copper-red shine. Benefits of PP Copper Electrolyte BMG‑130.1 Bright, uniform, glossy copper layers Thicker deposits than many standard copper solutions Excellent adhesion on conductive substrates Ideal as a base layer for nickel, gold, or other metals Easy to use with graphite or copper anodes Versatile application on plastics with conductive paint Technical Parameters (Guideline Values) PropertyValue / RangeProduct typePP Copper ElectrolyteElectrolyte typeBright copper plating solutionVoltageapprox. 3 V and aboveTemperature14–25 °CCopper content> 60 g/LDeposition rateapprox. 2 µm/min at 3.5 VLayer hardnessapprox. 380–385 HVLayer density8.8 g/cm³Anode materialGraphite or copperApplicationBath, pen, or tampon electroplating Note: Values are practical guidelines; results may vary depending on equipment, voltage, and temperature. Practical Application Instructions Preparation: Clean and degrease surfaces. For non-conductive parts, apply a conductive paint first. Plating: Operate the electrolyte within recommended voltage and temperature ranges. Use graphite or copper anodes for uniform layers. Post-Treatment: Rinse plated parts with water and dry. Light polishing can further enhance gloss if desired. Safety Instructions Wear protective gloves, goggles, and appropriate clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Work in well-ventilated areas Do not ingest; keep out of reach of children Dispose according to local chemical waste regulations Conclusion The PP Copper Electrolyte BMG‑130.1 is a high-performance and versatile solution for producing bright, uniform copper layers. Whether for decorative finishes, corrosion protection, or as a foundation for further electroplating, it provides excellent layer quality, easy handling, and professional results for hobbyists, workshops, and industrial applications.

Copper plates:    This accessory is another Real Gold innovation.  It prevents scratches or burn marks caused by the crocodile clip and increases the conductivity on the surface.

Acid Bright Copper Electrolyte BMG 095.2 – Mirror Finish, Conductivity & Premium Results The Acid Bright Copper Electrolyte BMG 095.2 is a high-performance plating solution designed for depositing mirror-bright, highly conductive copper layers in bath plating, pen plating, and tampon plating applications. Its optimized formulation ensures smooth, brilliant and high-gloss copper deposits, making it ideal both as a decorative finish and as a base layer for further coatings such as nickel or gold. Suitable for beginners and professionals alike, this electrolyte delivers consistent, high-quality results. Key Benefits at a Glance Mirror-bright, high-gloss copper finishes Excellent electrical conductivity Strong adhesion on metallic substrates Suitable for: Bath electroplating Pen plating Tampon plating Ideal for decorative and technical applications Fast and uniform deposition Applications Jewelry manufacturing & finishing Decorative high-gloss surfaces PCB and electronics Model making & precision engineering Base layer for gold or nickel plating Technical ParametersThe following values represent typical operating parameters for acid bright copper electrolytes:PropertyValue / RangeElectrolyte typeAcid bright copper electrolytepH valueapprox. 1Operating temperature15–50 °CVoltage (tank plating)0.5–2.5 V (recommended ~1–1.5 V at 10 cm electrode distance)Voltage (brush / pen plating)1.2–4.5 V (recommended ~3 V)Current density0.6–5 A/dm² (up to ~7 A/dm² with agitation)Deposition rateapprox. 1 µm/min at 5 A/dm² and 20 °CAnode materialCopper or graphiteSuitable substratesCopper, brass, stainless steel, acid-resistant metalsNot suitable without pretreatmentAluminum, chromium, zinc, tin, titaniumImportant:Acid-sensitive metals such as steel, iron or zinc must first be pre-plated with an alkaline copper electrolyte before using this acid copper system. Application Guide (Beginner to Professional) 1. Surface Preparation (critical for mirror finish) Thoroughly degrease the workpiece Activate/pickle for a clean metallic surface Rinse with distilled water Do not touch the surface afterwards 2. Bath Plating (for perfect mirror finishes) Fully immerse the workpiece Apply DC current within recommended range Agitation improves brightness and uniformity Plate until desired thickness is achieved Ideal for uniform, high-gloss coatings 3. Pen Plating (precision bright repair) Apply electrolyte via felt or sponge tip Move evenly across the surface Start with low voltage, increase gradually  Perfect for localized high-gloss applications  4. Tampon Plating (controlled bright application) Soak the tampon with electrolyte Apply evenly to the surface Maintain consistent pressure and motion  Ideal for hard-to-reach areas  Pro Tips for Maximum Brightness Perfect cleaning = maximum mirror finish Avoid excessive current density → may cause dull areas Agitation significantly improves surface quality Keep solution clean and uncontaminated Maintain stable temperature Conclusion The Acid Bright Copper Electrolyte BMG 095.2 is the perfect solution for achieving high-gloss, conductive and visually flawless copper coatings. Whether for decorative or technical use, it delivers reliable, professional-grade results every time. Practical Application Notes Surface preparation: Thorough degreasing and cleaning are essential No grease, fingerprints or residues should remain on the surface Tank plating: Maintain recommended voltage and current density Keep appropriate distance between anode and cathode Brush / pen plating: Keep the plating pad in constant motion for uniform deposition Temperature: Can be used at room temperature or heated up to 50 °C for improved deposition behavior Safety Information Acid copper electrolytes contain acidic components and copper salts and must be handled carefully: Wear chemical-resistant gloves, safety goggles and protective clothing Avoid contact with skin and eyes In case of contact, rinse immediately with plenty of water Use only in well-ventilated areas Do not inhale vapors or aerosols Do not discharge into drains or the environment Keep out of reach of children Always observe the Safety Data Sheet (SDS) and applicable hazard labeling. Scope of Delivery Acid Bright Copper Electrolyte BMG-095.1 Quantity according to selection

Copper Alligator Clip - Negative Terminal Clip: Always use only as a negative terminal! This allows you to secure the clip in a hidden location or attach the negative terminal to a hidden location. Rust-proof and durable. The very soft clip prevents scratches during contact. Rust-proof and long-lasting, zinc-free, these clips pose no risk of contamination – plus they last up to 200 times longer than plated clips. 

Conductivity Tester:   With this simple tester you can immediately determine whether the surface is conductive, whether there is a fine layer of paint or whether the chrome plating is only vapour-deposited non-conductive chrome. Delivery without batteries! Attention: Design - manufacturer, model and colour vary!